News

/News/

PIPENET Vision 1.9.0 Release – December 2017

PIPENET Vision 1.9.0 Release - December 2017. PIPENET Vision 1.9.0 has a new interface, runs calculations faster, and Includes More Than 100 New Features.

By | November 15th, 2017|News|0 Comments

PIPENET AT OTC 2017

Once again, we were proud to show PIPENET® -  the leading software for dynamic and steady state fluid flow analysis - at OTC in May 2017. It is a great pleasure for us to meet old friends and to meet engineers from Houston and all over the world. As always there was phenominal interest in [...]

By | June 8th, 2017|Uncategorized|0 Comments

PIPENET At OTC May 2017

The Sunrise Systems Ltd Team will be present at OTC again from May 1st - 4th 2017. We will be pleased to see you, and happy to demonstrate PIPENET to you.

By | March 15th, 2017|News, PIPENET News|0 Comments

Simplified Design & Analysis In Spray/Sprinkler Module

PIPENET VISION 1.8.0 introduced a simplification to the design/analysis dialog box and tools which makes it much more flexible and easier to use. 

By | November 1st, 2016|PIPENET Tips|Comments Off on Simplified Design & Analysis In Spray/Sprinkler Module

Modelling Foam Concentrate Systems In PIPENET Spray/Sprinkler

NFPA 16: Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems 2011 specifies the following rules for hydraulic calculations for foam systems: 7.4 Hydraulic Calculations 7.4.1 Foam-Water Deluge Systems. 7.4.1.3 Hydraulic calculations for piping carrying water or the foam solution shall be in accordance with NFPA 13, Standard for the Installation of Sprinkler [...]

By | October 24th, 2016|PIPENET Tips|0 Comments

Autosave in PIPENET

It is good practice to save your work frequently as you work. This can be done automatically after you have saved it to the location of your choice for the first time. Autosave is a feature that can be used to automatically save your edits and modifications periodically.

By | October 11th, 2016|PIPENET Tips|0 Comments

Am I using the latest version of PIPENET?

We strongly recommend customers to use the latest version of PIPENET at all times to ensure you have all of the latest features. With more than 150 new features in PIPENET Vision 1.8.0 there’s a lot of additional functionality to enjoy in the Standard and Transient modules as well as PIPENET Spray/Sprinkler module. To check [...]

By | October 11th, 2016|PIPENET Tips|0 Comments

Welcome To PIPENET® Leading The Way In Fluid Flow Analysis

Welcome To The New Website For PIPENET®, The World Leading Software For Fluid Flow Analysis in Pipes. You'll Find More Resources, Including Case Studies and Information On 'How To...' Than Ever Before. For Full Access To PIPENET® Resources, Please Register.

By | July 6th, 2016|News|0 Comments

PIPENET Vision 1.8.1 Released Nov 2016

There were more than 150 new features included in PIPENET Vision 1.8.0 released in April 2016. PIPENET Vision 1.8.0 is an excellent release with a very few bug fixes required. These have been included in PIPENET Vision 1.8.1, making PIPENET Vision 1.8 even better! The PIPENET graph viewer has been enhanced too. To register to [...]

By | July 6th, 2016|PIPENET Releases|0 Comments

PIPENET® New Output Browser

PIPENET VISION 1.8.0 Transient Module releases a new output browser which enhances numerous aspects of the program including improvements to search and navigation.

By | June 1st, 2016|PIPENET News|0 Comments