PIPENET Tips

/PIPENET Tips

Simplified Design & Analysis In Spray/Sprinkler Module

PIPENET VISION 1.8.0 introduced a simplification to the design/analysis dialog box and tools which makes it much more flexible and easier to use.  It is no longer necessary to input both design and analysis specifications when they are not both required. In previous versions, it was necessary to perform the design phase for every calculation [...]

By | November 1st, 2016|PIPENET Tips|Comments Off on Simplified Design & Analysis In Spray/Sprinkler Module

Modelling Foam Concentrate Systems In PIPENET Spray/Sprinkler

NFPA 16: Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems 2011 specifies the following rules for hydraulic calculations for foam systems: 7.4 Hydraulic Calculations 7.4.1 Foam-Water Deluge Systems. 7.4.1.3 Hydraulic calculations for piping carrying water or the foam solution shall be in accordance with NFPA 13, Standard for the Installation of Sprinkler [...]

By | October 24th, 2016|PIPENET Tips|0 Comments

Autosave in PIPENET

It is good practice to save your work frequently as you work. This can be done automatically after you have saved it to the location of your choice for the first time. Autosave is a feature that can be used to automatically save your edits and modifications periodically. Select this option to set the interval, [...]

By | October 11th, 2016|PIPENET Tips|0 Comments

Am I using the latest version of PIPENET?

We strongly recommend customers to use the latest version of PIPENET at all times to ensure you have all of the latest features. With more than 150 new features in PIPENET Vision 1.8.0 there’s a lot of additional functionality to enjoy in the Standard and Transient modules as well as PIPENET Spray/Sprinkler module. To check [...]

By | October 11th, 2016|PIPENET Tips|0 Comments

Pumps In PIPENET Transient

There are three different pump models in Transient Module which can be chosen depending on the available data and the kind of scenario the user wants to simulate: Simple Pump: As the name suggests, it is the simplest pump model available, but it is enough for most of the simulations. A pump provides a pressure [...]

By | May 31st, 2016|PIPENET Tips|0 Comments